How to Clean Wood Floors and Protect Them

7-minute read
Jump to comments
How to Install Prefinished Hardwood Flooring

Knowing how to clean and protect wood floors isnโ€™t difficult. You do, however, need to understand how differentย sealers work and the advantages and disadvantages of each. If youโ€™ve just installedย prefinished hardwood flooring, you also want to know how to protect that perfect finish.

Check out our article on how to care for wood floors for more info

Types of Wood Floor Cleaners

Two basicย types of wood floor cleaners and sealers exist in the marketplace. You have penetrating sealers and top sealers. Penetratingย sealers, as the name implies, soak into the wood and seal from within. When theย floor becomes worn, you can reapply penetrating sealers. This helps protect your wood floors from future dirt and wear.

how to protect wood floors

Top sealers, like lacquer,ย shellac, and varnish, stay on top of the wood. You canโ€™t really apply these to wornย spots without them showing. With top-sealers, you typically have to sand andย reapply the entire finish.

Knowing this, you can understand why we recommend you understand how to clean and protect your floors. Basic maintenance and care can really help stave offโ€”for a timeโ€”massive reconstructive work down the road.

cleaning gloss coating

How to Clean Wood Floors Naturally

Several natural cleaners and cleaning methods exist on the market. Others can be madeย from household products and solutions. Weโ€™ve listed some below.

Vinegar and Water

For a good all-around cleaner, add a 1/2 cup of vinegar to oneย gallon of water and mix. Spread it with a sponge and avoid applying itย directly to the floor. This works to remove the most common dirt and grime. It restores the original finish of the wood without removing it.

Mineral Oil

Take a soft cloth and use mineral oil to clean small areas of aย wooden floor. Note, mineral oil differs from mineral spirits. You can find mineral oil in most grocery stores. Oddly enough, people also used it as a sort of laxativeโ€”so you may also find it in your local pharmacy. Considered โ€œfood-safeโ€, mineral oil gets a lot of use as a finish on wooden bowls and butcher blocks.

Mineral spirits is more like paint thinner. You can actually use it on floors to remove very stubborn grime or oil-based stains. Typically, we wouldnโ€™t recommend it for use on the entire floor unless you want to remove the existing oil, polish, or wax coating. You typically want to apply something new after using mineral spirits in order to protect your wood floors from further wear and staining.

How to Clean Wood Floors with Teaโ€ฆYes, Tea

You might not think weโ€™d include tea in an article on how to clean wood floors. And honestly, we really canโ€™t personally vouch for this one. However, a somewhat less-traditional remedy for cleaning hardwood floors involves brewing aย strong pot of black tea. You then apply it with a soft cloth to the surface of the floor to pick up dirt.

The thought goes that the tea acts as an astringent to remove grease. If you want to try this, it takes about a half dozen bags per pot of water. Steep it for a bit to really allow the tea to get nice and strong.

Add this to a mop bucket and add more water as needed to cool it down. Then mop the solution with a wrung-out mop. Donโ€™t soak the floor with the teaโ€”you just want it damp enough to work its magic. We also recommend testing this on a small area of the floor to ensure you donโ€™t create any stains or spotting.

Ice for Removing Gum or Crayon Stains

Now we want to show you how to clean wood floors with iceโ€ฆor at least how to rid yourself of a pesky patch of something sticky. Sometimes gum or another material, like crayons, makes its way onto your wood floors. When that happens, ice works as a remedy. After freezing gum or crayon stains with an ice pack, you can gentlyย scrape them off once theyโ€™re hardened up.

Alcohol or Turpentine for Burn Marks

You can rub alcohol or turpentine into burn marks to ablate them away (rub them off). Your technique needs to take into account the type of wood flooring and finish, however. For example, waxed or polished wood might fix easily and then you can reapply the top coating.

With a high-gloss, lacquered wood, alcohol might help remove the burn mark, but you have to watch that finish. Ultimately, sanding and refinishing a section of flooring might be required.

For a varnished finish, you may need to rely on sanding gently to remove the burn mark from the wood surface. Pros have also told us theyโ€™ve applied a small amount of bleach to lighten areas affected by burns.

Enzymatic Cleaners

Enzymatic cleaners are best for cleaning any odorous conditions like petย stains. These cleaners actually useโ€”as you might guessโ€”enzymes that help break down stains. Since these are biological in nature, they speed up the processes that eliminate odor-causing stains. Itโ€™s not magic, but itโ€™s close.

Vegetable Oil and Vinegar

If you want to clean just the top coat of your wood floors, vinegar and vegetable oil work wonders. Aย surface or top-coat cleaner can be made from a 1:1 mix ofย vegetable oil and vinegar. Just apply a thin coat of the solution on theย surface of the floor and rub it in well with a soft cloth. This solution also wonโ€™t take off any of the coatings that may already cover and protect your wood floors.

Generalย Cleaning and Waxing

Youย want to vacuum your wood floor regularly in order to protect your wood floors from dust and dirt. This can grind into the surface over time, causing damage. We useย a Hoover Air cordless vacuum that is nearly effortless for this type of work. If you have a spill, wipe it up quickly soย it doesnโ€™t get to set in. The idea is to use a damp (but not soaked) cloth orย towel to quickly clean up spills. Then dry the area with a paper towel.

Whenย necessary, you can use a solvent-based liquid wax to remove dirt and old wax. Likeย older style car waxes, these products are applied with a clean cloth (orย cloth-covered applicator) and typically leave a coating that must be buffedย after it dries. Electric polishers are available from many rental stores thatย can aid in this entire process.

how to clean wood floors

How to Clean Painted Wood Floors

If youโ€™re trying to get clean wood floors and yourย floors are painted, try mixing a teaspoon of washingย soda into a gallon of hot water. Washing soda differs in makeup from baking soda. Then, use a mop to wash the floor. This also worksย well to remove mildew.

Oil Soap, a liquid, sells under several brand names. Use itย as directed by the manufacturer to clean painted floors. To be safe, start by washing a small area of your wood floor. Pick one that isnโ€™t in a highly visible area.ย If the finish holds up and doesnโ€™t change in appearance, continue to follow theย instructions and use the product on the remainder of the floor.

If the finishย shows discoloration, consult a wood flooring professional.

Final Thoughts

If youย protect and maintain your wood floors, you will be able to enjoy them longer and with fewerย periods of major maintenance. There is no reason a residential wood floorย cannot last virtually forever, provided it is maintained and cleanedย periodically.

Related articles

0 0 votes
Article Rating
guest

0 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x