Milwaukee M18 Brushless Threaded Rod Cutter

The Milwaukee M18 Brushless Threaded Rod Cutter is coming this March. The big deal is in its design to make overhead cutting more uniform and opening up your line of sight.

Milwaukee M18 Brushless Threaded Rod Cutter Highlights

Brushless, But Not Fuel

While this model has a brushless motor, it’s not part of the Fuel lineup. Similar to the Compact Brushless Combo Milwaukee came out with, it has the advantages of a brushless design but isn’t one of their premium motors.

Uniform Cuts

The cutter jaws are set in 1-1/2″ from the front of the tool. When you’re cutting against material or hardware that the rod is attached to, it leaves uniform length that’s still short enough for a deep well socket to run the nut up.

Auto-Retracting Jaws

Auto-retracting jaws let you keep one hand on the tool and the other on the rod. When you’re working overhead, you don’t have to worry about dropping the wast end of the rod on coworkers below. If you’re pre-fabbing lengths of rod, you can cut and feed without stopping to release the jaws as you go.

Improved Line of Sight

The cutting jaws are on the left corner of the tool. When you make cuts with your right hand, it puts the jaws and rod on the inside of the tool where it’s easy to see.

Other Features

• LED light
• Lanyard hole
• Four-sided dies rotate to different sizes with an onboard hex key

Performance

Grinders and other tools you might use often leave imperfections that make it tough to get a nut started. Milwaukee promises burr-free cuts that you can hand thread nuts onto easier and faster than a hand cutter.

The kit will come with a 2.0 Ah pack and Milwaukee tells us they’re getting more than 400 cuts on a charge – presumably on the 1/4″ diameter. It’s enough to make our team wonder if they could have pulled it off as part of their M12 lineup.

To switch diameters, you use the onboard hex key to remove and rotate the die between 1/4″, 3/8″, and 1/2″ sizes. You can cut all three sizes with mild steel and stainless in the smaller two.

Price

The Milwaukee M18 Brushless Threaded Cutter retails for $329 bare and $399 for a kit with a 2.0 Ah battery and charger. Here’s how the competition looks:

• DeWalt DCS350: $299 bare, $379 kit

Pretty slim competition, huh? Most dedicated tools for the job are either hand tools or large production level system like Greenlee’s Shear 30T.

Milwaukee M18 Brushless Threaded Rod Cutter Specs

• Model Number: 2872-21 (Kit) 2872-20 (bare tool)
• Capacity:
  • Mild Steel: 1/4”, 3/8”, ½” Coarse Threaded Rod
  • Stainless Steel: 1/4”, 3/8 Coarse Threaded Rod
• Four-Sided Upper & Lower Dies
• LED Light
• Integrated Lanyard Hole
• Onboard Allen Key
• Battery: M18 Red Lithium CP2.0
• Tool Length:11”
• Tool Weight (w/ battery): 8.7 lbs